Choosing which inverter to use for your on-grid solar system requires a good amount of research, especially, when you are flooded with so many choices in the market. If you want to get the best solar inverter with a 10kW capacity, this detailed guide is just right for you.
Now, you might be concerned about a few things like the price, the build quality, or even the country of origin of the inverter. So, here are 10 of the best 10kW on-grid string inverters out there for your solar power system.
No.
Inverter Model
Standard Warranty
Country of Origin
Max Efficiency
Pricing
1
Fronius SYMO 10.0-3-M
5 years
Austria
98.0%
USD 1,672.43
2
SMA Sunny Tripower 10.0 STP10.0-3AV-40
5 years
Germany
98.3%
USD 1,830.28
3
SolarEdge SE10K
12 years
Hungary
98.0%
USD 1,947.97
4
Fimer (ABB) PVI-10.0-TL-OUTD
5 years
Italy
97.8%
USD 1,525.00
5
Ingeteam INGECON SUN 10 TL
5 years
Spain
96.8%
USD 1,118.51
6
SunGrow SG10KTL-MT
5 years
China
98.6%
USD 1,377.95
7
Delta RPI-M10A
5 years
Taiwan
98.3%
USD 1,873.25
8
Huawei SUN2000-10KTL-M0
5 years
China
98.6%
USD 2,292.07
9
KACO blueplanet 10.0 TL3
5 years
Germany
98.5%
USD 1,967.56
10
Goodwe GW10KT-DT (G2)
5 years
China
98.3%
USD 1,096.12
Best On-Grid Solar Inverters with at least 10,000W Rated Power Capacity
Along with the maximum efficiency, pricing, and country of origin, there are some other factors to consider when choosing the best solar inverter with the 10kW power capacity.
If you are planning to build your own solar PV system, you might want to know how much a 10kW solar system cost.
We have also asked a group of solar experts about the best 10kW inverters for them
For the sake of information gathering, we have made a poll in one of the most active Facebook Group for solar experts called Quality Solar. They were asked with the question: “What are your top 10 string inverters for 10kWac installation?”.
A big thanks to all the people in this community who voted and shared their thoughts, so here is the result of the poll as seen below.
Top 10 string inverters with 10kW capacity according to Quality Solar
Fronius SYMO 10.0-3-M
To be considered one of the top tier string inverters, Fronius has packed its inverter model SYMO 10.0-3-M with unique and helpful features. This inverter is produced by an Austria-based company.
It boasts with its easy-to-install process, which they call SnapINverter technology. It is the design for the inverter backplate, housing the AC and DC terminals, which will be fixed to a wall or a rigid structure. After fixing it, the main body of the inverter will easily slide and snap into the backplate while connecting both AC and DC connections into their proper terminals inside the device.
Advantages and Benefits
Easy installation with SnapInverter Technology
High quality product
Very low night-time consumption
Dual MPPT
Built-in Wireless Capability for monitoring
Good aftersales/technical support
Established since 1992
IP66
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max / Imppt max)
27.0 / 16.5 A
Max. short circuit current, module array
40.5 / 24.8 A
DC input voltage range (Udc min – Udc max)
200 – 1000 V
Feed-in start voltage (Udc start)
200 V
Nominal input voltage (Udc,r)
600 V
MPP voltage range (Umpp min – Umpp max)
270 – 800 V
Usable MPP voltage range
200 – 800 V
Number of DC connections
3 + 3
Max. PV generator power (Pdc max)
15 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
10 kVA
AC output current (Iac nom)
14.4 A
Grid connection (Uac,r)
3~ NPE 400/230, 3~ NPE 380/220 V
AC voltage range (Umin – Umax)
150 – 280 V
Frequency (fr)
50 / 60 Hz
Frequency range (fmin – fmax)
45 – 65 Hz
Total harmonic distortion
1.8 %
Power factor (cos φac,r)
0 – 1 ind./cap.
GENERAL DATA
Height
725 mm
Width
510 mm
Depth
225 mm
Weight
34.8 kg
Degree of protection
IP 66
Protection class
1
Overvoltage category (DC / AC)
2 / 3
Night-time consumption
< 1 w
Inverter design
Transformerless
Cooling
Regulated air cooling
Installation
Indoors and outdoors
Ambient temperature range
-40°C – +60°C
Permitted humidity
0 – 100 %
Max. altitude
2,000 m / 3,400 m
DC connection technology
6x DC+ and 6x DC- screw terminals 2.5 – 16 mm²
AC connection technology
5-pin AC screw terminals 2.5 – 16 mm²
Certificates and compliance with standards
ÖVE / ÖNORM E 8001-4-712, DIN V VDE 0126-1-1/A1, VDE AR N 4105, IEC 62109-1/-2, IEC 62116, IEC 61727, AS 3100, AS 4777-2, AS 4777-3, CER 06-190, G83/2, UNE 206007-1, SI 4777, CEI 0-16, CEI 0-21, NRS 097
EFFICIENCY
Maximum efficiency (PV – grid)
98 %
European efficiency (ηEU)
97.4 %
η at 5% Pac,r
87.9 / 92.5 / 89.2 %
η at 10% Pac,r
91.2 / 94.9 / 92.8 %
η at 20% Pac,r
94.6 / 97.1 / 96.1 %
η at 25% Pac,r
95.4 / 97.3 / 96.6 %
η at 30% Pac,r
95.6 / 97.5 / 96.9 %
η at 50% Pac,r
96.3 / 97.9 / 97.4 %
η at 75% Pac,r
96.5 / 98.0 / 97.6 %
η at 100% Pac,r
96.5 / 98.0 / 97.6 %
MPP adaptation efficiency
> 99.9 %
PROTECTION DEVICES
DC insulation measurement
Yes
Overload behaviour
Operating point shift, power limitation
DC disconnector
Yes
Reverse polarity protection
Yes
INTERFACES
WLAN / Ethernet LAN
Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)
6 inputs and 4 digital inputs/outputs
Interface to ripple control receiver
USB (type A socket)
Data logging, inverter update via USB flash drive
2x RS422 (RJ45 socket)
Fronius Solar Net
Signalling output
Energy management (floating relay output)
Datalogger and web server
Integrated
External input
S0 meter connection / Evaluation of overvoltage protection
RS485
Modbus RTU SunSpec or meter connection
SMA Sunny Tripower 10.0 (STP10.0-3AV-40)
SMA has been on the top of the line when it comes to inverter quality for the past few years. Now, with this particular 10kW inverter which they call Sunny Tripower 10.0, their commercial and residential arsenal has become more powerful.
“It combines top inverter performance with maximum ease and comfort for its users. With integrated services and shade solutions, it can meet any challenge found on roofs. The Sunny Tripower reliably ensures maximum solar yields and reduces electricity costs.”
SMA Solar Technology AG is a German solar PV equipment manufacturer established in 1981 and headquartered in Niestetal, Northern Hesse, Germany.
Advantages and Benefits
Easy installation
High quality product
Dual MPPT
Built-in Wireless Capability for monitoring
Established since 1981
High efficiency level
Lightweight
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max / Imppt max)
20 A / 12 A
Max. short circuit current, module array
30 A / 18 A
DC input voltage range (Udc min – Udc max)
125 – 1000 V
Feed-in start voltage (Udc start)
150 V
Nominal input voltage (Udc,r)
580 V
MPP voltage range (Umpp min – Umpp max)
320 – 800 V
Usable MPP voltage range
320 – 800 V
Number of DC connections
A:2; B:1
Max. PV generator power (Pdc max)
15 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
10 kVA
AC output current (Iac nom)
14.4 A
Grid connection (Uac,r)
3 / N / PE; 220 V / 380 V 3 / N / PE; 230 V / 400 V 3 / N / PE; 240 V / 415 V
AC voltage range (Umin – Umax)
180 – 280 V
Frequency (fr)
50 Hz / 45 Hz to 55 Hz 60 Hz / 55 Hz to 65 Hz
Frequency range (fmin – fmax)
50 Hz / 45 Hz to 55 Hz 60 Hz / 55 Hz to 65 Hz
Total harmonic distortion
< 3 %
Power factor (cos φac,r)
1 / 0.8 overexcited to 0.8 underexcited
GENERAL DATA
Height
497 mm
Width
460 mm
Depth
176 mm
Weight
20.5 kg
Degree of protection
IP 65
Protection class
1
Overvoltage category (DC / AC)
NA
Night-time consumption
5.0 w
Inverter design
Transformerless
Cooling
Convection
Installation
Indoors and outdoors
Ambient temperature range
‒25 °C to +60 °C (‒13 °F to +140 °F)
Permitted humidity
0 – 100 %
Max. altitude
3000 m
DC connection technology
SUNCLIX DC connector
AC connection technology
AC connector
Certificates and compliance with standards
AS 4777.2, C10/11, CE, CEI 0-21, EN 50438, G59/3-4, G83/2-1, DIN EN 62109 / IEC 62109, NEN-EN50438, ÖVE/ÖNORM E 8001-4-712 & TOR D4, PPC, PPDS, RD1699, SI4777, TR3.2.1, UTE C15-712, VDE-AR-N 4105, VDE0126-1-1, VFR 2014, RfG compliant DEWA, IEC 61727, IEC 62116, IE-EN50438, MEA, NBR16149, NT_Ley20.571, PEA, TR3.2.2
EFFICIENCY
Maximum efficiency (PV – grid)
98.3 %
European efficiency (ηEU)
98.0 %
PROTECTION DEVICES
DC reverse polarity protection
Short-circuit diode
Input-side disconnection point
DC Load-Break Switch
AC short-circuit current capability
Current control
Grid monitoring
SMA Grid Guard 10.0
Maximum overcurrent protection
32 A
Ground fault monitoring
Insulation monitoring: Riso > 200 kΩ
All-pole sensitive residual-current monitoring unit
Available
INTERFACES
Communication protocols
Modbus (SMA, Sunspec), Webconnect, SMA Data, TS4-R
Datalogger and web server
Integrated
RS485
Modbus RTU SunSpec or meter connection
SolarEdge SE10K
SolarEdge Technologies, Inc. is an American-Israeli company, established in 2006, that manufactures solar inverters, power optimizers, and monitoring systems for PV arrays. Today, the company has offices across the globe – United States, Germany, Italy, Japan, and Israel.
SolarEdge offers an array of quality inverters. This includes the 10kW model which is known as the SolarEdge SE10K. It boasts of its feature which is specifically designed to work with power optimizers.
Advantages and Benefits
Designed to work with SolarEdge power optimizers
Built-in panel-level monitoring receiver
Offers a standard 12-year warranty (extendable to 20 or 25 years)
Minimum noise levels for residential environments (no external fan)
Superior efficiency (98%)
Small, light, and easy to install
Built-in module level monitoring
Internet connection through ethernet or WIFI
IP65 for indoor or outdoor installation
Fixed voltage inverter for longer strings
Smart Energy Management control
INPUT DATA
Number of MPP trackers
1
Max. input current (Idc max)
16.5 A
Max. short circuit current, module array
16.5 A
DC input voltage range (Udc min – Udc max)
750 – 900 V
Nominal input voltage (Udc,r)
750 V
Number of DC connections
2
Max. PV generator power (Pdc max)
13.5 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
10 kVA
AC output current (Iac nom)
16 A
AC Output Voltage – Line to Line / Line to Neutral (Nominal)
380V / 220V ; 400V / 230V
AC Output Voltage – Line to Neutral Range
184 – 264.5 V
Frequency (fr)
50/60 ± 5 Hz
Total harmonic distortion
< 3%
Power factor (cos φac,r)
1 (adjustable from -0.9 to +0.9)
GENERAL DATA
Height
260 mm
Width
540 mm
Depth
315 mm
Weight
33.2 kg
Degree of protection
IP 65
Protection class
1
Overvoltage category (DC / AC)
2 / 3
Night-time consumption
< 2.5 w
Inverter design
Transformerless
Cooling
Fan (user replaceable)
Installation
Indoors and outdoors
Ambient temperature range
-20°C to +60°C (M40 version -40°C to +60°C)
Permitted humidity
0 – 100 %
Max. altitude
2,000 m
DC connection technology
6x DC+ and 6x DC- screw terminals 2.5 – 16 mm²
AC connection technology
5-pin AC screw terminals 2.5 – 16 mm²
Certificates and compliance with standards
IEC-62103 (EN50178), IEC-62109, IEC61000-6-2, IEC61000-6-3 , IEC61000-3-11, IEC61000-3-12, FCC part15 class B
Grid Connection Standards
VDE 0126-1-1, VDE-AR-N-4105, AS-4777, G83 / G59
EFFICIENCY
Maximum efficiency (PV – grid)
98 %
European efficiency (ηEU)
97.6 %
PROTECTION DEVICES
Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds
Fimer, who acquired ABB’s solar inverter business, is an Italian company which has now become one of the largest solar energy inverter providers in the world. They have the PVI-10.0 model under their string inverter portfolio, which is great for commercial or residential use.
ABB is known as a powerhouse name in terms of electrical equipment manufacturing. The inverters they have provided in the past few years have proven to be of superior quality.
Advantages and Benefits
Transformerless topology
Inverter grid code settings for specific locations
True three-phase bridge topology for DC/AC output converter
Wide input range
Dual input section with independent MPPTs, allowing the optimization of harvesting solar energy
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max / Imppt max)
34.0 A / 17.0 A
Max. short circuit current, module array
40.5 / 24.8 A
DC input voltage range (Udc min – Udc max)
200 V – 850 V
Feed-in start voltage (Udc start)
360 V (adj. 250 V…500 V)
Nominal input voltage (Udc,r)
580 V
MPP voltage range (Umpp min – Umpp max)
300 – 750 V
Number of DC connections
2 + 2
Max. PV generator power (Pdc max)
10.3 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
11.5 kVA
AC output current (Iac nom)
16.6 A
Grid connection (Uac,r)
Three-phase 3W+PE or 4W+PE
AC voltage range (Umin – Umax)
320 – 480 V
Frequency (fr)
50 / 60 Hz
Frequency range (fmin – fmax)
47- 53 Hz / 57- 63 Hz
Total harmonic distortion
< 2 %
Power factor (cos φac,r)
> 0.995, adj. ±0.9 with Pacr = 10.0 kW, ±0.8 with max 11.5 kVA
GENERAL DATA
Height
716 mm
Width
645 mm
Depth
224 mm
Weight
41 kg
Degree of protection
IP 65
Protection class
1
Overvoltage category (DC / AC)
2 / 3
Night-time consumption
< 1 w
Inverter design
Transformerless
Cooling
Natural cooling
Installation
Indoors and outdoors
Ambient temperature range
-40°C to +80°C
Permitted humidity
0 – 100 %
Max. altitude
2,000 m
DC connection technology
4x DC+ and 4x DC- PV quick fit connector (2.5 – 16 mm²)
AC connection technology
5-pin AC screw terminals – maximum 16 mm² each cable
Certificates and compliance with standards
EN 50178, IEC/EN 62109-1, IEC/EN 62109-2, AS/NZS 3100, AS/NZS 60950.1,EN 61000-6-2, EN 61000-6-3, EN 61000-3-11, EN 61000-3-12
Grid standard
CEI 0-21, CEI 0-16, DIN V VDE V 0126-1-1, VDE-AR-N 4105, G59/3, C10/11, EN 50438 (not for all national appendices), RD 1699, RD 413, RD 661, P.O. 12.3, AS/NZS 4777, IEC 61727, IEC 62116, BDEW, MEA, NRS 097-2-1, VFR 2014
EFFICIENCY
Maximum efficiency (PV – grid)
97.8 %
European efficiency (ηEU)
97.1 %
PROTECTION DEVICES
Anti-islanding protection
Yes
DC disconnector
Yes
Reverse polarity protection
Yes
INTERFACES
Wired local monitoring
PVI-USB-RS232_485 (optional)
Remote monitoring
VSN300 Wifi Logger Card (optional), VSN700 Data Logger (optional)
Wireless local monitoring
VSN300 Wifi Logger Card (optional)
User interface
16 characters x 2 lines LCD display
Datalogger and web server
Optional
RS485
Modbus RTU SunSpec or meter connection
Ingeteam INGECON SUN 10 TL
Ingeteam is an international company that specializes in electric power conversion technology. This company has produced an array of solar inverters including the INGECON SUN 10 TL which is especially built for small to medium-sized PV installations.
Advantages and Benefits
Maximum efficiency with 3 independent MPPT inputs
Easy to maintain with its built-in datalogger for up to 3 months data storage
Free software included such as INGECON ® SUN Manager, INGECON ® SUN Monitor and its iSun Monitor smartphone version for monitoring and recording the inverter data over the internet.
Standard 5 year warranty, extendable for up to 25 years
Sturdy design with it stainless steel housing
More than 45 years experience in the power electronics sector, and more than 26 year track record in renewable energy
Protection for input and output overvoltages with type 3 surge arrester monitoring
Protection for output short-circuits and overloads
Protection for insulation failures
Lower price point compared to other manufacturers
INPUT DATA
Number of MPP trackers
3
Max. input current (Idc max)
22 A
Max. short circuit current, module array
22 A
DC input voltage range (Udc min – Udc max)
125 – 550 V
Feed-in start voltage (Udc start)
125 V
Nominal input voltage (Udc,r)
330 V
MPP voltage range (Umpp min – Umpp max)
155 – 450 V
Usable MPP voltage range
155 – 450 V
Number of DC connections
12
Max. PV generator power (Pdc max)
12.9 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
11 kW
Max. output power (Pac max)
11 kVA
AC output current (Iac nom)
17 A
Grid connection (Uac,r)
3-phase 400 V
AC voltage range (Umin – Umax)
150 – 280 V
Frequency (fr)
50 / 60 Hz
Total harmonic distortion
< 3 %
Power factor (cos φac,r)
1.0 at Pout>25% of the rated power – adjustable
GENERAL DATA
Height
668 mm
Width
644 mm
Depth
280 mm
Weight
56 kg
Degree of protection
IP 65
Overvoltage category (DC / AC)
2 / 2
Night-time consumption
< 0 w
Stand-by consumption
< 30 w
Inverter design
Transformerless
Cooling
Forced convection using six fans (three inlet and three outlet)
Installation
Indoors and outdoors
Ambient temperature range
-20°C – +70°C
Permitted humidity
0 – 95 %
DC connection technology
12x DC+ and 12x DC- FV Type 4 quick connectors 2.5 – 16 mm²
The SG10KTL-MT is one of the string inverters manufactured by a Chinese company known as SunGrow. This 10kW string inverter is also feature-packed along with its high level of power conversion efficiency at 98.6%.
Sungrow Power Supply Co., Ltd, which is based in Hefei, China, was founded in 1997. Since then, it has now become one of the largest inverter manufacturer in Asia.
Advantages and Benefits
Max. efficiency 98.6%, European efficiency 98.1%
4 string inputs, flexible PV configuration
High anti-corrosion with aluminum alloy die casting
Built-in SPD and residual current protection
Easy installation with plug and play connectors
Higher current inputs, which makes it flexible for connecting more PV strings in parallel
Wider MPP voltage range
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max)
44 A (22 A / 22 A)
Max. short circuit current, module array
60 A (30 A / 30 A )
DC input voltage range (Udc min – Udc max)
200 – 1100 V
Feed-in start voltage (Udc start)
200 V
Nominal input voltage (Udc,r)
600 V
MPP voltage range (Umpp min – Umpp max)
200 – 1000 V
Usable MPP voltage range
320 – 850 V
Number of DC connections
2 + 2
Max. PV generator power (Pdc max)
not mentioned
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
10 kVA
AC output current (Iac nom)
16.5 A
Grid connection (Uac,r)
3~ NPE 400/230 V
AC voltage range (Umin – Umax)
270 – 480 V
Frequency (fr)
50 / 60 Hz
Frequency range (fmin – fmax)
45 – 55 Hz / 55 – 65 Hz
Total harmonic distortion
< 3 %
Power factor (cos φac,r)
> 0.99 / 0.8 leading – 0.8 lagging
GENERAL DATA
Height
485 mm
Width
370 mm
Depth
210 mm
Weight
24 kg
Degree of protection
IP 65
Protection class
1
Overvoltage category (DC / AC)
2 / 2
Night-time consumption
< 1 w
Inverter design
Transformerless
Cooling
Smart forced air cooling
Installation
Indoors and outdoors
Ambient temperature range
-25°C – +60°C
Permitted humidity
0 – 100 %
Max. altitude
4000 m
DC connection technology
4x DC+ and 4x DC- max. 6 mm²
AC connection technology
Plug and play connector max. 16 mm²
Certificates and compliance with standards
EN 62109-1, EN 62109-2, IEC61000-6-2, IEC 61000-6-3, IEC 62116, AS 4777.2
EFFICIENCY
Maximum efficiency (PV – grid)
98.6 %
European efficiency (ηEU)
98.1 %
PROTECTION DEVICES
Leakage current protection
Yes
Overvoltage protection
Yes
DC disconnector
Yes
Reverse polarity protection
Yes
INTERFACES
WLAN / Ethernet LAN
Optional
Display
LED, Bluetooth + APP
Datalogger and web server
Optional
RS485
Yes
Delta RPI-M10A
Delta Electronics, Inc., is an electronics manufacturing company from Taiwan which was founded in April 1971. Its headquarters are located in Neihu, Taipei.
This company has manufactured high-quality solar PV inverters which include the Delta RPI-M10A in the 10,000W range. This inverter boasts its features and its build quality which made it to be listed as one of the top solar PV devices in the market.
Advantages and Benefits
Max. efficiency 98.3%, European efficiency 98.1%
Dual MPP Trackers
Wide Voltage Range (200 ~ 1000Vdc)
Reactive Power Control
Ergonomic Grip Design
Ultra Compact Size
Built-in Energy-logger
IP65 Protection Level
Built-in AC/DC Switch
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max)
15 A/10 A
Max. short circuit current, module array
25 A
DC input voltage range (Udc min – Udc max)
200 – 1000 V
Feed-in start voltage (Udc start)
250 V
Nominal input voltage (Udc,r)
600 V
MPP voltage range (Umpp min – Umpp max)
270 – 800 V
Usable MPP voltage range
415 – 800 V
Number of DC connections
3 pairs
Max. PV generator power (Pdc max)
12.5 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
10.5 kVA
AC output current (Iac nom)
14.4 A
Grid connection (Uac,r)
3 Ph, 400 V
AC voltage range (Umin – Umax)
400 V ± 20 % (320~480)
Frequency (fr)
50 Hz
Frequency range (fmin – fmax)
45 – 55 Hz
Total harmonic distortion
< 3 % at Rated Power
Power factor (cos φac,r)
0.8 Lagging ~ 0.8 Leading
GENERAL DATA
Height
445 mm
Width
510 mm
Depth
177 mm
Weight
25 kg
Degree of protection
IP 65
Protection class
1
Overvoltage category (DC / AC)
2 / 3
Night-time consumption
< 2 w
Inverter design
Transformerless
Cooling
Natural convection
Installation
Indoors and outdoors
Ambient temperature range
-25°C – +60°C
Permitted humidity
0 – 100 %
Max. altitude
2,000 m
DC connection technology
Multi-Contact MC4, 4 – 6 mm²
AC connection technology
5-wire grid systems 3P4W (L1, L2, L3, N, PE) or 4-wire grid systems 3P3W (L1, L2, L3, PE)
Certificates and compliance with standards
VDE-AR-N 4105:2011; DIN VDE V 0124-100:2012; DIN VDE, V 0126-1-1, EN 61000; IEC 61000, IEC 62109-2, IEC 61683:1999, IEC 60068-2 (1,2,14,30), IEC 60529
EFFICIENCY
Maximum efficiency (PV – grid)
98.3 %
European efficiency (ηEU)
98 %
PROTECTION DEVICES
Input-side Disconnection Device
Yes
Ground Fault Monitoring / Grid Monitoring
Yes
DC Reverse Polarity Protection
Yes
DC Over Voltage / Current Limitation Protection
Yes
AC Over Voltage / Current Limitation Protection
Yes
AC Short Circuit Protection
Yes
DC / AC Side Surge Protection – Inbuilt
Yes, MOV
INTERFACES
Communication Port
MODBUS RTU over RS 485 Physical Layer
Display
20 x 4 LCD
Built-in Energy Data Logger
Yes
Emergency Power Off (EPO)
Yes, External Switch to be Connected
Huawei SUN2000-10KTL-M0
Huawei is a world-renowned company when it comes to information and communication technology infrastructure. It was founded in 1987 and now has become one of the leading global providers of solar PV inverters.
In 2019, Huawei’s SUN2000 smart inverter series has been awarded as one of the three winners of the Intersolar AWARD. (Source)
The Huawei SUN2000-10KTL-M0 model has since become popular in residential and commercial installations. This inverter boasts with its compact and lightweight design, along with its high efficiency in converting sunlight into useable electricity.
Advantages and Benefits
Max. efficiency 98.6%, European efficiency 98.1%
Dual MPP Trackers
Lightweight (17kg)
Battery Ready with plug and play
Compact Size
Arc fault protection
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max)
11 A
Max. short circuit current, module array
15 A
DC input voltage range (Udc min – Udc max)
140 – 980V
Feed-in start voltage (Udc start)
200 V
Nominal input voltage (Udc,r)
600 V
MPP voltage range (Umpp min – Umpp max)
470 – 850 V
Number of DC connections
2 + 2
Max. PV generator power (Pdc max)
14.88 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
11 kVA
AC output current (Iac nom)
16.9 A
Grid connection (Uac,r)
220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PE
Frequency (fr)
50 / 60 Hz
Total harmonic distortion
≤ 3 %
Power factor (cos φac,r)
0.8 leading … 0.8 lagging
GENERAL DATA
Height
525 mm
Width
470 mm
Depth
166 mm
Weight
17 kg
Degree of protection
IP 65
Protection class
1
Overvoltage category (DC / AC)
2 / 2
Night-time consumption
< 5.5 w
Inverter design
Transformerless
Cooling
Natural convection
Installation
Indoors and outdoors
Ambient temperature range
-25°C – +60°C (derated at +45ºC or higher)
Permitted humidity
0 – 100 %
Max. altitude
4,000 m
DC connection technology
4x DC+ and 4x DC- Amphenol Helios H4
AC connection technology
3 to 5-pin AC terminals 6 – 16 mm²
Certificates and compliance with standards
EN/IEC 62109-1, EN/IEC 62109-2, G98, G99, EN 50438, EN50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, IEC61727, IEC62116, DEWA
EFFICIENCY
Maximum efficiency (PV – grid)
98.6 %
European efficiency (ηEU)
98.1 %
PROTECTION DEVICES
Input-side disconnection device
Yes
Anti-Islanding protection
Yes
DC reverse polarity protection
Yes
Insulation monitoring
Yes
AC & DC surge protection
Yes, compatible TYPE II protection class according to EN/IEC 61643-11
AC short-circuit protection
Yes
AC overvoltage protection
Yes
Arc fault protection
Yes
Ripple receiver control
Yes
INTERFACES
Communication
RS485; RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE; 4G / 3G / 2G via Smart Dongle-4G (Optional)
Datalogger and web server
Optional
KACO blueplanet 10.0 TL3
KACO new energy is a German inverter manufacturer based in Neckarsulm , Baden-Württemberg. Founded in 1999, it is one of the pioneers of transformer-less inverter technology, which has set the standard today because of its high degree of efficiency.
They have released the blueplanet TL3 inverter series for residential and small commercial solar power systems. For the 10,000W range, they present the blueplanet 10.0 TL3 which packs a lot of great features.
Advantages and Benefits
Dual MPP Trackers
Wide MPP range
Data logger with web server for continuous system monitoring
Optimized for the targeted self-consumption of solar power
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max)
11 A
Max. short circuit current, module array
16 A
DC input voltage range (Udc min – Udc max)
200 – 950 V
Feed-in start voltage (Udc start)
250 V
Nominal input voltage (Udc,r)
653 V
MPP voltage range (Umpp min – Umpp max)
470 – 800 V
Usable MPP voltage range
470 – 800 V
Number of DC connections
1 + 1
Max. PV generator power (Pdc max)
12 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
10 kVA
AC output current (Iac nom)
14.4 A
Grid connection (Uac,r)
240 V / 415 V (3 / N / PE) 230 V / 400 V (3 / N / PE) 220 V / 380 V (3 / N / PE)
AC voltage range (Umin – Umax)
305 – 480 V
Frequency (fr)
50 / 60 Hz
Frequency range (fmin – fmax)
45 – 65 Hz
Total harmonic distortion
0.27 %
Power factor (cos φac,r)
0.30 ind. – 0.30 cap
GENERAL DATA
Height
522 mm
Width
363 mm
Depth
246 mm
Weight
30 kg
Degree of protection
IP65 / NEMA 4
Protection class
1
Overvoltage category (DC / AC)
3 / 3
Night-time consumption
< 3 w
Inverter design
Transformerless
Cooling
Fan
Installation
Indoors and outdoors
Ambient temperature range
-25°C – +60°C, derating from +40°C
Permitted humidity
0 – 100 %
Max. altitude
2,000 m
DC connection technology
2.5 – 6 mm² DC plugs (SUNCLIX)
AC connection technology
Phoenix AC connector
Certificates and compliance with standards
EN 62109-1 / -2, EN 61000-6-2 / -3, EN 61000-3-2 / -3
EFFICIENCY
Maximum efficiency (PV – grid)
98.3 %
European efficiency (ηEU)
97.4 %
PROTECTION DEVICES
Overvoltage conductor / varistor
Yes
Device temperature monitoring system
Yes
EMC filter
Yes
Anti-islanding detection
Yes
ISO/AFI detection of a generator insulation fault
Yes
INTERFACES
Display
Graphical display + LEDs
Control units
4-way navigation + 2 buttons
Communication
Ethernet, USB, RS485, optional: 4-DI
Datalogger and web server
Integrated
Goodwe GW10KT-DT (G2)
GoodWe Power Supply Technology Co.Ltd (“GoodWe”) is a rapidly growing manufacturer of solar PV string inverters. The Chinese string inverter supplier was founded in the year 2010 in the city of Suzhou.
For the 10,000W range, they have the Goodwe GW10KT-DT (G2) which brings several useful features.
Advantages and Benefits
Affordable price
Max. efficiency 98.3%, European efficiency 97.7%
Dual MPP Trackers
Wide range of MPP Voltage
Light weight (16kg)
INPUT DATA
Number of MPP trackers
2
Max. input current (Idc max)
12.5 A/12.5 A
Max. short circuit current, module array
15.6 A/15.6 A
DC input voltage range (Udc min – Udc max)
210 – 1000 V
Feed-in start voltage (Udc start)
160 V
Nominal input voltage (Udc,r)
620 V
MPP voltage range (Umpp min – Umpp max)
180~850 V
Usable MPP voltage range
180~850 V
Number of DC connections
1 + 1
Max. PV generator power (Pdc max)
15 kWpeak
OUTPUT DATA
AC nominal output (Pac,r)
10 kW
Max. output power (Pac max)
11 kVA
AC output current (Iac nom)
16 A
Grid connection (Uac,r)
400, 3L/N/PE
AC voltage range (Umin – Umax)
not mentioned
Frequency (fr)
50 / 60 Hz
Frequency range (fmin – fmax)
not mentioned
Total harmonic distortion
< 3 %
Power factor (cos φac,r)
~1 (Adjustable from 0.8 leading to 0.8 lagging)
GENERAL DATA
Height
433 mm
Width
354 mm
Depth
155 mm
Weight
16 kg
Degree of protection
IP 65
Protection class
1
Overvoltage category (DC / AC)
3 / 3
Night-time consumption
< 1 w
Inverter design
Transformerless
Cooling
Fan Cooling
Installation
Indoors and outdoors
Ambient temperature range
-30°C – +60°C
Permitted humidity
0 – 100 %
Max. altitude
4,000 m
DC connection technology
DC connectors, DEVALAN, SUNCLIX/MC4, AMPHENOL H4 and QC4.10 series, 2.5~4mm 2
AC connection technology
Max. outer diameter 10~18mm
Certificates and compliance with standards
EN 61000-6-3:2007+A1:2011+AC:2012; EN 61000-6-4:2007+A1:2011 EN 61000-3-2:2014 and EN 61000-3-3:2013 EN 61000-3-11:2000 and EN 61000-3-12:2011+AC:2013
EFFICIENCY
Maximum efficiency (PV – grid)
98.3 %
European efficiency (ηEU)
97.7 %
PROTECTION DEVICES
Anti-Islanding Protection
Yes
Insulation Resistor Detection
Yes
AC & DC surge protection
Yes
Input Reverse Polarity Protection
Yes
Residual Current Monitoring Unit
Yes
Output Over Current Protection
Yes
Output Short Protection
Yes
Output Over Voltage Protection
Yes
INTERFACES
User Interface
LCD&LED
Communication
WiFi or LAN
Conclusion
The quest for improving solar PV inverter quality is a never-ending journey. As the global demand for solar energy increases, it is essential that the overall performance of the solar PV devices also get better. Furthermore, learning how to switch on and to switch off an inverter will also be beneficial for all the readers.
For solar string inverters, the competition for increasing maximum efficiency, better build quality, cost-effectiveness, and more safety features will bring a brighter future to the renewable energy industry, particularly the solar PV.
He loves to read news and articles about renewable energy and technology. He is experienced in the solar energy industry. He loves to write articles, guides, and tutorials about solar PV technology.
